Liquid Filters and Cartridges

Product Details:

Bicomponent Thermally Bonded Filters cartridges are manufactured using a unique technology using polyphony thermally bonded bicomponent fibers resulting in a rigid complex filter matrix. The unique fiber-to-fiber bond forms a very rigid, stable porosity matrix thereby eliminating the need for a support core. The patented construction of this filter cartridge provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a three-dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in the fiber matrix throughout the life of the filter providing for precise filtration and eliminating filter unloading. These Filters are one to one replacement for 3M (Cuno) Betapure, Chisso Filters ( CP Filters ), CED Filters, Paint Mix Room Filters etc.These are Equivalent to Chisso CP Filters. These Filters are used in CED Paint Shop in Top Coat & Base Coat, Paint Mix Room (PMR) etc.

Application:

• Pharmaceutical pre-filtration
• High-quality paint, resins & ink
• Ced / top coat in automotive plants
• Bottled water/blend water in breweries
• Process/rinse water
• Desalination/pre RO
• Cathode ray tube / cd-DVD manufacture
• Lens coatings
• Printed circuit boards

Filter MOC:

• Media: Bi-component fibers of polyphony
• Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100,125, 150 & 200 µm
• O rings / gaskets: Buna n, epdm, silicone, viton

Operating conditions:

• Maximum operating temp: 82^oC
• Recommended change out differential pressure: 35 psig

Request
Callback

Product Details:

PP Wound Filter Cartridges are designed to optimize on the surface area of the PP media for higher flow rate, lower clean Delta P and longer Service life. High-Efficiency Pleated Polypropylene (PP) Filter Cartridges provide more surface area for higher flow rate and longer life. Designed for food & bevarage, pharmaceutical, semiconductor and other demanding process applications, the all PP construction and gradient density microfibre media provide excellent removal efficiencies and high contaminant holding capacities.

Applications:

• Pharmaceutical Pre filtration DI Water Process / Rinse water
• Fine Chemicals Lens Coatings
• DE Trap filters in Breweries
• CD / DVD media

Request
Callback

Product Details:

Trinity Stainless Steel Filter Cartridges.

Application:

• Catalyst recovery in petrochemical & chemical
• Polymer filtration
• Gas filtration
• Oil filtration
• Fuel & hydraulic oil
• Paints
• Waste water

Filter specification:

• Removal ratings: 1, 3, 5, 10, 20, 50 100 µm

Operating conditions:

• Maximum operating temp: 232^oC
• Recommended change out differential pressure: 60 psig

Request
Callback

Product Details:

These Filters are one to one replacement for 3M (Cuno) Betapure, Chisso Filters ( CP Filters ), CED Filters, Paint Mix Room Filters etc.These are Equivalent to Chisso CP Filters. These Filters are used in CED Paint Shop in Top Coat & Base Coat, Paint Mix Room (PMR) etc.

Request
Callback

Product Details:

Cellulose RBC Filter offered comes produced from cellulose fibres that are intrinsically bonded together by melamine resin.

 

Features:

• Help create solid, highly durable porous structure
• Assure stronger cartridge finish with less possibility to collapse

 

Specifications:

• Cartridge materials used meet FDA specifications
• Providing for completely safe usage in applications involving potable drinking water, beverages, cosmetics
• Clean white cellulose fibre construction does not impart taste, odour or colour to liquids
• Available in cartridge style options of grooved and un-grooved
• Grooved cartridge option designed to provide more surface area with higher dirt holding capacity
• Un-grooved cartridge preferred in areas where strength is major concern
• Filters designed to withstand temperatures up to 120 degree C Equivalent to Cuno /3M Resin Bonded Cartridge Filters

Request
Callback

Product Details:

We are a noteworthy organization actively engaged in offering a wide assortment of Liquid Filters. The offered filter is manufactured with the help of basic raw material and contemporary technology in compliance with set industrial norms.

Features:

• Smooth functioning
• High efficiency
• Robust construction

Other specifications:

• TRINITY Lenticular positively Charged Cellulose depth filters are specifically formulated to meet the performance demands of biopharmaceutical and biotech applications. The filter media utilize mechanical and electro-kinetic adsorptive capture mechanisms to remove particles, microorganisms, colloids, and pyrogen from critical process streams.Trinity can provide on-site trial assistance to validate the performance of these filters in new processes and applications. The Pharmaceutical Grade filter modules are manufactured to procedures described in a Drug Master File (DMF) on record at the National Center for Drugs and Biologics.

 

Applications:

• Blood Products
• Large Volume parenterals
• Cell Separation
• Cough Syrups
• Pre filtration of Sterile membrane filters
• Chromatography Column protection
• Post Fermentation Clarification

Filter MOC:

• Media: Cellulose fibres with inorganic filter Aids
• End Caps: Polypropylene
• Cartridge bands: Stainlesss Steel
• 'O' Rings / Gaskets: Ethylene Propylene, Silicone, Nepropene, Nitrile, Viton

Request
Callback

Product Details:

Micro String Wound Filters cartridges are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs. Micro string filters have high structural integrity combined with a greater voids volume. Giving a lower pressure drop, much-improved dirt holding capacity and efficiency compared to conventional wound filters.

Filter MOC:

• Media: Polypropylene, cotton (CFR 21 listed) & glass fiber heat purified
• Core: Polypropylene, tinned steel, stainless steel 304 & 316
• Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm

Dimensions:

• Nominal lengths: 9. 75, 10, 20, 30 & 40 inches
• Outside diameter: 2. 5 inches (6. 3 cm)

Operating conditions:

• Maximum operating temperature: 80 deg C for pp

Request
Callback

Product Details:

We deals in Oil Filtration Resin Bonded Filters.

Specifications:

• Equivalent to Cuno
• 3M Resin Bonded Cartridge Filters

Request
Callback

Product Details:

We are manufacturing, supplying and exporting PP Pleated Filters. These filters are finely designed by the team of skilled engineers and efficient workers of the industry. These elements are dimensionally accurate and offer hassle-free performance.

Request
Callback

Product Details:

PTFE Membrane Filter Cartridges are carefully constructed for the Bio-pharma, beverage and fine chemical industries to provide secure reliable filtration. They are designed to completely remove bacteria, viruses, and particles from air and gas streams, even in the presence of humidity and moisture. The filter is ideal for filtration of solvents in sterile API manufacture, fermenter inlet air and exhaust venting, sterile process air, and sterile venting of tanks and autoclaves. The filters have a 0.2 micron PTFE membrane validated for absolute bacterial retention with the challenge data correlated to water intrusion testing.

Applications:

• Sterile venting
• Sterile Filtration of Air & Gas
• Sterile Filtration of Solvents
• Ophthalmic Solutions
• Vent for Autoclaves, Stills & WFI tanks
• Bulk Tank Vents
• High Purity Chemicals
• Phage removal from Air

Filter MOC:

• Media: 0.2 µm Hydrophobic PTFE membrane
• Support Media: Polypropylene
• Cage / Core / End Caps: Polypropylene
• 'O' Rings / Gaskets: Buna N, EPDM, Silicone, Viton
• International Support Ring: Stainless Steel

Dimensions:

• Nominal lengths: 9.75, 10, 20, 30, 40 inches
• Outside Diameter: 2.7 inches (6.9 cm)
• Inside Diameter: 1 inch (2.54 cm)

Operating Conditions:

• Maximum Diff. Pressure: 4.1 bar at 20 deg C / 2.1 Bar at 60 deg C
• Sterilization: Autoclave 30 Mins at 126 deg C. In line Steam 30 Mins. at 135 deg C

Request
Callback

Product Details:

Paint Filters cartridges are manufactured using a unique technology using polyolefin thermally bonded bicomponent fibers resulting in a rigid complex filter matrix. The unique fiber-to-fiber bond forms a very rigid, stable porosity matrix thereby eliminating the need for a support core. The patented construction of this filter cartridge provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a three-dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in the fiber matrix throughout the life of the filter providing for precise filtration and eliminating filter unloading. These Filters are one to one replacement for 3M (Cuno) Betapure, Chisso Filters ( CP Filters ), CED Filters, Paint Mix Room Filters etc.

Application:

• Pharmaceutical pre-filtration
• High-quality paint, resins & ink
• Ced / top coat in automotive plants
• Bottled water/blend water in breweries
• Process/rinse water
• Desalination/pre RO
• Cathode ray tube / cd-DVD manufacture
• Lens coatings
• Printed circuit boards

Filter MOC:

• Media: Bi-component fibers of polyolefin
• End caps: Polypropylene
• Removal ratings : 1, 3, 5, 10, 25, 50, 75, 100,125, 150 & 200 µm
• O rings/gaskets: Buna n, EPDM, silicone, Viton

Operating conditions:

• Maximum operating temp: 82^oC
• Recommended change-out differential pressure: 35 psi

Request
Callback

Product Details:

Pleated Polypropylene Filters cartridges are designed to optimize on the surface area of the pp media for higher flow rate, lower clean delta p, and longer service life. High-efficiency pleated polypropylene (pp) filter cartridges provide more surface area for higher flow rate and longer life. Designed for food & beverage, pharmaceutical, semiconductor and other demanding process applications, the all pp construction and gradient density microfibre media provide excellent removal efficiencies and high contaminant holding capacities. All materials of construction are CFR 21 compliant for food contact application.

Applications:

• Pharmaceutical pre-filtration
• Di water
• Process/rinse water
• Fine chemicals
• Lens coatings
• De-trap filters in breweries
• Cd / DVD media

Dimensions:

• Nominal lengths: 9. 75, 10, 20, 30, 40 inches

Operating conditions:

• Maximum operating temp: 82^oC
• Recommended change-out differential pressure: 35 psi

Request
Callback

Product Details:

Polyethersulfone Sterilizing Grade Filters are manufactured to conform to the stringent quality standards required by filters that come in contact with biologicals, pharmaceuticals and other critical processes. The filter cartridges conform to toxicity tests, meet the requirement of up 29 biological test for plastics, and are manufactured using components that comply with CFR 21 regulations. The filters are supported by a validation guide prepared specifically for manufacturers requiring product documentation as part of their qualification process.

Application:

• Pharmaceuticals
• Biologicals
• Solvents
• Ophthalmic solutions
• Lvp/svp/sterile API
• Vaccines
• High purity chemicals
• High purity water

Filter MOC:

• Media: 0.2 µm Hydrophobic PTFE membrane
• Support Media: Polypropylene
• Cage / Core / End Caps: Polypropylene
• 'O' Rings / Gaskets: Buna N, EPDM, Silicone, Viton
• International Support Ring: Stainless Steel

Dimensions:

• Nominal lengths: 9.75, 10, 20, 30, 40 inches
• Outside Diameter: 2.7 inches (6.9 cm)

Operating Conditions:

• Maximum Diff. Pressure: 4 bar at 20 deg C / 2.1 Bar at 60 deg C
• Sterilization: Autoclave 30 Mins at 126 deg C. In line Steam 30 Mins. at 135 deg C

Request
Callback

Product Details:

We provide RBC Oil Filters.

Specifications:

• Equivalent to Cuno
• 3M Resin Bonded Cartridge Filters

Request
Callback

Product Details:

Resin Bonded Filter Cartridge features an Acrylic Fiber-Phenolic resin/ Cellulose Fibers-Melamine Resin construction that produces an extremely rigid pore structure. This construction allows the filter to withstand extreme viscosities and temperature without compression or collapse. In addition, a true graded density construction allows complete utilization of the filter's depth, with coarse particles captured in the outer zones and finer particles captured in the inner qualifying zone.

Applications:

• Paints & Resins
• Inks
• Adhesives
• Lacquers, Varnishes
• Fuel Oils, Crude Oils
• Machine Coolants
• Dielectric Oils
• Lube Oil
• Cutting Oil
• Plasticizers

Media:

• Acrylic Fibers bonded with Phenolic Resin
• Cellulose Fibers bonded with Melamine Resin (CFR 21 Listed )

Removal Ratings:

• 1, 5, 10, 25, 50, 75, 100,125 150 µm

Other Details:

• Maximum Operating Temp: 121°c
• Recommended Change out differential pressure: 35psi

Request
Callback

Product Details:

Spun and Melt Blown Depth Filter Cartridges are made of 100% polypropylene. With no additives or surfactants used that can cause foaming or other undesirable effects to the filtrate quality. With true graded density construction. These cartridges have the most dirt holding capacity available. The spun-bond cartridges are the perfect choice when both economy and efficiency are critical.

Application:

• Ro prefiltration
• Petrochemicals
• Desalination
• Plating solutions
• Photographic chemicals
• Edible Oils
• Paints and inks

Filter MOC:

• Media: Polypropylene
• Optional end caps: Polypropylene
• Removal ratings: 1, 2, 3, 5, 10, 25, 50, 75, 100 µm
• End connections: ( 226 'o' ring, 222 'o' ring )
• Gasket / o - rings: Silicone, EPDM, buna n, Viton

Dimensions:

• Nominal lengths: 9. 75, 10, 20, 30, 40 inches

Operating conditions:

• Maximum operating temp: 60°C
• Recommended change-out differential pressure: 35 psi

Request
Callback

Product Details:

Spunbond Cartridges are made of 100% Polypropylene. with no additives or surfactants used that can cause foaming or other undesirable effects to the filtrate quality. With true graded density construction. these cartridges have the most dirt holding capacity available. The SPUN-BOND cartridges are the perfect choice when both economy and efficiency are critical.

Application:

• RO Prefiltration
• Petrochemicals
• Desalination
• Plating Solutions
• Photographic Chemicals
• Edible Oils
• Paints and Inks
• Water & Waste Water Treatment

Request
Callback

Product Details:

Top Coat Filters cartridges are manufactured using a unique technology using polyolefin thermally bonded bicomponent fibers resulting in a rigid complex filter matrix. The unique fiber-to-fiber bond forms a very rigid, stable porosity matrix thereby eliminating the need for a support core. The patented construction of this filter cartridge provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a three-dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in the fiber matrix throughout the life of the filter providing for precise filtration and eliminating filter unloading. These Filters are one to one replacement for 3M (Cuno) Betapure, Chisso Filters ( CP Filters ), CED Filters, Paint Mix Room Filters etc.These are Equivalent to Chisso CP Filters. These Filters are used in CED Paint Shop in Top Coat & Base Coat, Paint Mix Room (PMR) etc.

Application:

• Pharmaceutical pre-filtration
• High-quality paint, resins & ink
• Ced / top coat in automotive plants
• Bottled water/blend water in breweries
• Process/rinse water
• Desalination/pre RO
• Cathode ray tube / cd-DVD manufacture
• Lens coatings
• Printed circuit boards

Filter MOC:

• Media: Bi-component fibers of polyolefin
• End caps: Polypropylene
• Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100,125, 150 & 200 µm
• O rings / gaskets: Buna n, epdm, silicone, viton

Operating conditions:

• Maximum operating temp: 82^oC
• Recommended change-out differential pressure: 35 psi

Request
Callback

Product Details:

We deals in Transformer Oil Filtration Resin Bonded Filters.

Specifications:

• Equivalent to Cuno
• 3M Resin Bonded Cartridge Filters

Request
Callback

Product Details:

Wound Cartridge Filter is manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs. Micro String filters have high structural integrity combined with a greater voids volume. giving a lower pressure drop, much-improved dirt holding capacity and efficiency compared to conventional wound filters.

MOC:

• Media: Polypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
• Core: Polypropylene, Tinned Steel, Stainless Steel 304 & 316

Operating Conditions:

• PP: 80°C. Cotton with SS Core: 120°C, Glass Fibre with SS Core: 400°C
• Recommended Maximum differential pressure: 35 psi

Other Details:

• Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
• End Connections: DOE ( Standard ) / SOE ( on demand )

Request
Callback

Product Details:

The wound Filter Cartridge is a major innovation in blanketed filter technology. It combines an enhanced open wind process with an internal media blanket. This provides superior flow rates, greater filtration efficiency, and consistent filter performance from batch to batch.

Features:

• High dirt holding capacity
• Wide Range of Removal Ratings
• Blanket media filter cartridge
• Graded density construction
• No media migration
• Low extractable levels
• Suitable for wide range of applications
• Cleaner, more durable construction
• Higher filtration efficiency at the selected rating
• Low-pressure drop and Longer Service Life
• Cost effective filtration
• Easy to install and remove
• Ensures process and system compatibility
• Reduces filter change-outs
• Suitable for all Standard Size filter housings

Food Grade Compliance:

• Trinity Micro-String series Blanket Media filter is manufactured from materials listed in Title 21 Listed of the USA FDA Code of Federal Regulations and are safe for food contact applications

Chemical Compatibility:

• Please refer to chemical compatibility guide to select a suitable media and core for your application. Trinity, however, suggests that the chemical compatibility guide may be used as a reference only. Trinity recommends a compatibility test for your fluids in actual process conditions for selecting the suitable media & core

Filter MOC:

• Core: Polypropylene
• Micron rating: 0.5,1, 3, 5, 10, 25, 50,75, 100 µm
• End Connections: DOE Standard

Operating Conditions:

• Max. Operating Temp: 80°C for PP with PP core
• 120 °C for Cotton with SS core

Request
Callback

Product Details:

Wound Filter Cartridges/ Micro String is manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs. Micro String filters have high structural integrity combined with a greater voids volume. giving a lower pressure drop, much-improved dirt holding capacity and efficiency compared to conventional wound filters.

Filter MOC:

• Media: Polypropylene, cotton (CFR 21 listed) & glass fiber heat purified
• Core: Polypropylene, tinned steel, stainless steel 304 & 316
• Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm

Dimensions:

• Nominal lengths: 9. 75, 10, 20, 30 & 40 inches
• Outside diameter: 2. 5 inches (6. 3 cm)

Operating conditions:

• Maximum operating temperature: PP: 80 deg C
• Cotton with SS core: 120 deg C, Glass fibre with SS core: 400 deg C

Request
Callback

Product Details:

We are manufacturer and supplier of Wound Filters. These Filters are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside.

Request
Callback

Product Details:

Trinity Resin Bonded Grooved Cartridges (RBC) filters are extremely rigid. These Filters are one to one replacement for the 3M (Cuno) Micro-clean Cartridge Filter, Polyklean Cartridge Filters.

Application:

• Paints & Resins
• Inks
• Adhesives
• Lacquers, Varnishes
• Fuel Oils, Crude Oils
• Machine Coolants

Dielectric Oils:

• Lube Oil
• Cutting Oil
• Plasticizers

Removal Ratings:

• 1, 2, 3, 5, 10, 25, 50, 75, 100, 125, 150 µm

Dimensions:

• Outside Diameter : 2.6 inches (6.6 cm)
• Inside Diameter : 1 inch (2.54 cm)

 

Operating Conditions:

• Maximum Operating Temperature: PP: 80°C. Cotton with SS Core: 120°C Glass Fibre with SS Core: 400°C
• Recommended Change out differential pressure: 35psi

Request
Callback

Product Details:

Critical Pharmaceutical Membrane Filters are carefully constructed for the Bio-pharma, beverage and fine chemical industries to provide secure reliable filtration. They are designed to completely remove bacteria, viruses and, particles from air and gas streams, even in the presence of humidity and moisture. The filter is ideal for filtration of solvents in sterile API manufacture, fermenter inlet air and exhaust venting, sterile process air, and sterile venting of tanks and autoclaves. The filters have a 0.2 micron PTFE membrane validated for absolute bacterial retention with the challenge data correlated to water intrusion testing.

Applications:

• Sterile venting
• Sterile Filtration of Air & Gas
• Sterile Filtration of Solvents
• Ophthalmic Solutions
• Vent for Autoclaves
• Stills & WFI tanks
• Bulk Tank Vents
• High Purity Chemicals
• Phage removal from Air

Filter MOC:

• Support Media: Polypropylene
• Cage / Core / End Caps: Polypropylene
• International Support Ring: Stainless Steel

Request
Callback

Product Details:

Trinity Lenticular Filters for Pharmaceutical Applications positively charged cellulose depth filters are specifically formulated to meet the performance demands of bio Pharmaceutical and bio-tech applications. The filter media utilize mechanical and electro-kinetic adsorptive capture mechanisms to remove particles, microorganisms, colloids, and pyrogen from critical process streams. Trinity can provide on-site trial assistance to validate the performance of these filters in new processes and applications. The pharmaceutical grade filter modules are manufactured to procedures described in a drug master file (dmf) on record at the national center for drugs and biologics.

Applications:

• Blood products
• Large volume parenterals
• Cell separation
• Cough syrups
• Pre-filtration of sterile membrane filters
• Chromatography column protection
• Post fermentation clarification

Filter MOC:

• End caps: Polypropylene
• Cartridge bands: Stainless steel
• 'O' rings / gasket: Ethylene propylene, silicone, Neoprene nitrile, viton®

Operating conditions:

• Maximum diff. Pressure: 35 psi (2. 5 bar ) @ 140^oF (60^oC)
• Maximum oper. Temp: 60⁰C

Request
Callback

Product Details:

We provide Schroeder Filters.

Request
Callback

Product Details:

We deals in Turbine Filters.

Request
Callback

Product Details:

Trinity Carbon Block Filters provide the most efficient filter performance possible by combining the highest quality, FDA-compliant raw materials with cutting-edge manufacturing methods resulting in unequaled performance. Trinity Carbon Block Filters employ a premium grade carbon with industry-leading surface area allowing for the optimum use of the carbon's adsorptive capacity. The Higher surface area extends the life of the cartridge, lowering the need for frequent filter changes. Trinity Carbon Block Filters offer exceptional consistency, which further maximizes the adsorption capacity and maintains consistent flow rates. Trinity Carbon Block Filters complement any drinking water treatment system in a wide range of applications including POE, POU, Commercial & Industrial Applications.

Features:

• Wide range of removal ratings to meet diverse application needs
• No media migration (No release of Carbon fines; initial Rinsing of filters recommended)
• Exceptionally low clean pressure drop
• Manufactured from NSF Std 61 Certified Coconut Shell Carbon
• NSF Certified for Material Safety- Standard 42
• Consistent performance at lower cost of filtration

 

Request
Callback