Filter Cartridges
Flow Max PP Pleated Filter Cartridges
Minimum Order Quantity: 100 Piece
Usage/Application | Industrial |
Material | Polypropylene |
Micron Ratings | 0.5,1,3,5,10,20,30,40,70 Microns |
Filter Type | Cartridge Filter |
Brand | Trinity Flow MAX |
Temperature Limit | 180 Degree Fahrenheit |
Color | White |
TRINITY Flow-MAX Pleated Filter Cartridges are designed to optimize the surface area of the PP media for higher flow rate, lower clean Delta P and longer Service life. The Filter provides more surface area due to its pleated design. All PP construction and gradient density micro-fiber media provide excellent removal efficiencies and high contaminant holding capacities. All materials used in this filter cartridge are CFR-21 complaint so, it is safe to use for food contact purposes.
FEATURES and BENEFITS
· Meets USP 24 Class VI biological test for plastics
· High Filtration Efficiency–99.9% (Beta 1000)
· Graded pore density graded density media for high dirt holding capacity
· Fixed pore construction, Eliminates unloading at maximum differential pressure
· Option of various Gasket/ ’O’-ring materials, Compatible with many fluids
· Pleated Glass Fibre media is ideal for retention of extremely small particles and colloidal materials.
· Economical & efficient filtration
Filter Specification:
Media | Polypropylene (PP) |
Inner Core | Polypropylene (PP) |
End Caps | Polypropylene (PP) |
Cage | Polypropylene (PP) |
Removal Ratings | 0.2, 0.45, 1, 2.5, 5, 10, 20, 25, 40, 50, 100 micron |
O Rings / Gaskets(for SOE): | Buna N, EPDM, Silicone, Viton, Teflon Encapsulated Viton ‘O’ rings. |
Applications :
· DI Water
· Process / Rinse water
· Fine Chemicals
· Solvent and gas pre filtration
· Lens Coatings
· DE Trap filters in Breweries
· CD / DVD media
Lenticular Filter Housing
Product Brochure
Flow Rate | 0. 5 to 1 GPM/ sq. ft |
Usage/Application | Industrial |
Brand | Trinity Charge-PLUS |
Media | Cellulose fibers with inorganic filter aids |
Applications | Pharmaceutical, food and beverages |
Operating Temperature | 60 degrees |
Applications:
- Blood products
- Large volume parenterals
- Cell separation
- Cough syrups
- Pre-filtration of sterile membrane filters
- Chromatography column protection
- Post fermentation clarification
Filter MOC:
- End caps: Polypropylene
- Cartridge bands: Stainless steel
- 'O' rings / gasket: Ethylene propylene, silicone, Neoprene nitrile, viton®
Operating conditions:
- Maximum diff. Pressure: 35 psi (2. 5 bar ) @ 140oF (60oC)
- Maximum oper. Temp: 600C
Trinity Pure-Guard Bi-Component Fibre Filter Cartridge
Product Brochure
Micron Ratings | 1 micron |
Filter Type | Cartridge Filter |
Type | Micron filter |
Material | polypropylene |
Usage/Application | Paints and Ink |
Brand | Trinity Pure-GUARD |
Color | White |
Material of End Caps | Polypropylene |
Inside diameter | 1.1 inch (25 mm) |
Nominal lengths | 9.75, 10, 20, 30, 40 inch |
Recommended change out | 2.5 bar |
Outside diameter | 2.5 inches (63 mm) |
Application:
- Pharmaceutical pre-filtration
- High-quality paint, resins & ink
- Ced / top coat in automotive plants
- Bottled water/blend water in breweries
- Process/rinse water
- Desalination/pre RO
- Cathode ray tube / cd-DVD manufacture
- Lens coatings
- Printed circuit boards
Filter MOC:
- Media: Bi-component fibers of polyphony
- Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100,125, 150 & 200 µm
- O rings / gaskets: Buna n, epdm, silicone, viton
Operating conditions:
- Maximum operating temp: 82oC
- Recommended change out differential pressure: 35 psig
Glass Fiber Filter Cartridge
Product Brochure
Micron Ratings | 0.2 Micron |
Length | 20 Inch |
Cartridge Type | Wound Filter Cartridge |
Diameter | 1.1 Inch |
Maximum Operating Temperature | 80 Deg. C |
Country of Origin | Made in India |
Hydraulic Oil Filters
Minimum Order Quantity: 50 Piece
Filter Type | Cartridge Filter |
Filter Medium Material | Acrylic Phenolic |
Material | AP |
Outside diameter | 6. 9 cm |
Nominal lengths | 9.75, 10, 20, 30, 40 inch |
Inside diameter | 2. 54 cm |
Resin Bonded Cartridge Filter
Material | Acrylic Phenolic |
Color | Brown |
Brand | Trinity |
Filter Type | Cartridge Filter |
Filter Medium Material | Acrylic Phenolic |
Size | 9.75, 19.5, 29.25, 39 inches |
Usage/Application | oils |
Trinity Pure-BOND Resin-bonded cartridge filters feature an advanced manufacturing process that produces a rigid graded density structure that allows the filter to withstand extreme viscosity and temperatures without deformation or collapse. The true graded density configuration allows complete utilization of the filter depth, with larger particles captured in the outer zone and finer particles trapped in the inner qualifying zone. The grooved design increases the surface area of the filter hence reducing the clean differential pressure and increasing the dirt holding capacity of the filter. The rigid construction ensures consistency, reproducible performance free from bye-pass and unloading.
Features & Benefits:
- Grooved outer surface increases surface area for extended service life
- Rigid structure designed to handle high differential pressure and can be used for high viscosity applications
- High voids volume ensures better dirt holding capacity resulting in longer service life
- Available in a wide range of removal ratings from 0.2 to 150 micron
- Two different types of Fibers & Resins (Acrylic Phenolic & Cellulose Melamine) for use in Industrial and pharmaceuticals/ Food & Beverages Applications respectively.
- No Metal/ plastic cores for easy disposal
- Broad chemical compatibility
Resin Bonded Filter Cartridge
Micron ratings | 1,5,10,25,50,75,100,125 Micron |
Filter Type | Cartridge Filter |
Color | Brown |
Outside Diameter | 6.6 cm |
Inside Diameter | 2.54 cm |
Nominal lengths | 9.75, 10, 20, 30, 40 inch |
Applications:
- Paints & Resins
- Inks
- Adhesives
- Lacquers, Varnishes
- Fuel Oils, Crude Oils
- Machine Coolants
- Dielectric Oils
- Lube Oil
- Cutting Oil
- Plasticizers
Media:
- Acrylic Fibers bonded with Phenolic Resin
- Cellulose Fibers bonded with Melamine Resin (CFR 21 Listed )
Removal Ratings:
- 1, 5, 10, 25, 50, 75, 100,125 150 µm
Other Details:
- Maximum Operating Temp: 121°c
- Recommended Change out differential pressure: 35psi
Additional Information:
- Delivery Time: Usually Ex-stock
Pleated Polypropylene Filter Cartridges
Minimum Order Quantity: 100 Number
Brand | Trinity Flo-MAX |
Filter Type | Liquid Filter |
Material | PP / PE |
Diameter | 1 inches |
Usage/Application | Industrial / Pharmaceutical |
Color | White |
Micron Ratings | 0.2 , 0.45, 1, 5, 10, 20, 50 |
Length | 9.75, 10, 20, 30, 40 inches |
Efficiency | 99.99% |
Sizes | 10", 20", 30" , 40" |
Spun Bonded Filter Cartridge
Product Brochure
Deep Filtration | yes |
Features | Bonded filter |
Packaging Type | Box |
Material | Silicone Rubber |
Color | White |
Country of Origin | Made in India |
Spun and Melt Blown Depth Filter Cartridges
Filter Type | Filter cartridge |
Brand | Trinity Spun-BOND |
Function | Water filtration |
Inside Diameter | 1. 1 inch (28 mm) |
Outside Diameter | 2. 6 inch (66 mm) |
Country of Origin | Made in India |
Application:
- Ro prefiltration
- Petrochemicals
- Desalination
- Plating solutions
- Photographic chemicals
- Edible Oils
- Paints and inks
Filter MOC:
- Media: Polypropylene
- Removal ratings: 1, 2, 3, 5, 10, 25, 50, 75, 100 µm
- End connections: ( 226 'o' ring, 222 'o' ring )
- Gasket / o - rings: Silicone, EPDM, buna n, Viton
Dimensions:
- Nominal lengths: 9. 75, 10, 20, 30, 40 inches
Operating conditions:
- Maximum operating temp: 80°C
- Recommended change-out differential pressure: 35 psi
Cellulose Resin Bonded Cartridge filter
Usage/Application | Industrial |
Material | Cellulose |
Micron Ratings | 0.5, 1,5,10,25,50,75,100 |
Type | Micron filter |
Filter Type | Cartridge Filter |
Brand | Trinity Pure-BOND |
Application:
- Paints & Resins
- Inks
- Adhesives
- Lacquers, Varnishes
- Fuel Oils, Crude Oils
- Machine Coolants
Dielectric Oils:
- Lube Oil
- Cutting Oil
- Plasticizers
PP Blanket Media Filter Cartridge
Material | Polypropylene |
Micron Ratings | 0.5, 1, 3,5,10,25,50,75,100 |
Type | Blanket Media |
Filter Type | Cartridge Filter |
Brand | Trinity |
Color | WHITE |
Outside Diameter | 2.5 inch (6.3 cm) |
Nominal Length | 9.75, 10, 20, 30, 40 inch |
Inside Diameter | 1.1 inch (2.8 cm) |
Country of Origin | Made in India |
Trinity Blanket Media Filter Cartridge is a major innovation in blanketed filter technology. It combines an enhanced open wind process with an internal media blanket. This provides superior flow rates, greater filtration efficiency, and consistent filter performance from batch to batch.
Features:
- High dirt holding capacity
- Wide Range of Removal Ratings
- Blanket media filter cartridge
- Graded density construction
- No media migration
- Low extractable levels
- Suitable for wide range of applications
- Cleaner, more durable construction
- Higher filtration efficiency at the selected rating
- Low-pressure drop and Longer Service Life
- Cost effective filtration
- Easy to install and remove
- Ensures process and system compatibility
- Reduces filter change-outs
- Suitable for all Standard Size filter housings
Food Grade Compliance:
- Trinity Micro-String series Blanket Media filter is manufactured from materials listed in Title 21 Listed of the USA FDA Code of Federal Regulations and are safe for food contact applications
Chemical Compatibility:
- Please refer to chemical compatibility guide to select a suitable media and core for your application. Trinity, however, suggests that the chemical compatibility guide may be used as a reference only. Trinity recommends a compatibility test for your fluids in actual process conditions for selecting the suitable media & core
Filter MOC:
- Core: Polypropylene
- Micron rating: 0.5,1, 3, 5, 10, 25, 50,75, 100 µm
- End Connections: DOE Standard
Operating Conditions:
- Max. Operating Temp: 80°C for PP with PP core
- 120 °C for Cotton with SS core
PP media, PP core for10 inch length.
** Price changes according to requirement
Carbon Block Filters
Packaging Type | Box |
Material | Silicone Rubber |
Color | multiple |
Application | Water Treatment |
Available Color | Black, White |
Capacity | 2.5-10 GPM |
Trinity Carbon Block Filters provide the most efficient filter performance possible by combining the highest quality, FDA-compliant raw materials with cutting-edge manufacturing methods resulting in unequaled performance. Trinity Carbon Block Filters employ a premium grade carbon with industry-leading surface area allowing for the optimum use of the carbon's adsorptive capacity. The Higher surface area extends the life of the cartridge, lowering the need for frequent filter changes. Trinity Carbon Block Filters offer exceptional consistency, which further maximizes the adsorption capacity and maintains consistent flow rates. Trinity Carbon Block Filters complement any drinking water treatment system in a wide range of applications including POE, POU, Commercial & Industrial Applications.
Features:
- Wide range of removal ratings to meet diverse application needs
- No media migration (No release of Carbon fines; initial Rinsing of filters recommended)
- Exceptionally low clean pressure drop
- Manufactured from NSF Std 61 Certified Coconut Shell Carbon
- NSF Certified for Material Safety- Standard 42
- Consistent performance at lower cost of filtration
PP Cartridge Filter
Minimum Order Quantity: 10 Piece
Length | 10" |
Filter Medium Material | Microfiber |
Usage/Application | Industrial |
Material | Stainless Steel |
Shape | round |
Additional Information:
- Delivery Time: 2-3 days
Resin Bonded Filters
Minimum Order Quantity: 100 Piece
Usage/Application | Oil |
Material | Acrylic Fiber |
Micron ratings | 1,5,10,25,50,75,100,125 Micron |
Type | Micron filter |
Filter Type | Cartridge Filter |
Brand | Trinity Pure-BOND |
Color | Brown |
Surface | Grooved |
Materials | Acrylic Fiber |
Nominal Lengths | 9.75, 10, 20, 30, 40 inch |
Application:
- Paints & Resins
- Inks
- Adhesives
- Lacquers, Varnishes
- Fuel Oils, Crude Oils
- Machine Coolants
Dielectric Oils:
- Lube Oil
- Cutting Oil
- Plasticizers
Stainless Steel Filter Cartridges
Material Grade | SS 304L, SS 316L |
Operating Temperature | 250 degrees |
Inside diameter | 1 inch (25.4 mm) |
Material | SS 304L, SS 316L |
Nominal lengths | 9. 75, 10, 20, 30, 40 inches |
Outside diameter | 2. 7 inches (69 mm) |
Application:
- Catalyst recovery in petrochemical & chemical
- Polymer filtration
- Gas filtration
- Oil filtration
- Fuel & hydraulic oil
- Paints
- Waste water
Filter specification:
- Removal ratings: 1, 3, 5, 10, 20, 50 100 µm
Operating conditions:
- Maximum operating temp: 232oC
- Recommended change out differential pressure: 60 psig
Micro String Wound Filters
Brand | Trinity |
Material | Polypropylene |
Color | White |
Usage | Fine Filtration For Variety Of Gas, Water Filter |
Core | Polypropylele, Tinned steel, SS304, SS316 |
End Cap | DOE, SOE (optional) |
Inner Diameter | 1 inch (25.4 mm) |
Length | 10 inches |
Micron Ratings | 1,3,5,10,25,50,75,100 |
Inside Diameter | 1 inch (25.4 mm) |
Country of Origin | Made in India |
Filter MOC:
- Media: Polypropylene, cotton (CFR 21 listed) & glass fiber heat purified
- Core: Polypropylene, tinned steel, stainless steel 304 & 316
- Removal ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
Dimensions:
- Nominal lengths: 9. 75, 10, 20, 30 & 40 inches
- Outside diameter: 2. 5 inches (63 mm)
Operating conditions:
- Maximum operating temperature: 80o C (PP)
PP media, PP core, 10 inch length.
** Price changes according to requirement
Bicomponent Fiber Filter
Material | Polyolefin |
Color | White |
Filter Type | Cartridge Filter |
Usage/Application | Paints, Automotive coating |
Length | 9.75 inch, 5 inch, 10 inch |
Structure | Pleated filter cartridge |
Outer Diameter | 65mm |
TRINITY Pure-GUARD Bi-Component Thermally Bonded Filter Cartridges are manufactured using a unique technology using polyolefin thermally bonded bi-component fibers resulting in a rigid complex filter matrix. The unique fiber-to-fiber bond forms a very rigid, stable porosity matrix thereby eliminating the need for a support core. The patented construction of this filter cartridge provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a three dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in the fiber matrix throughout the life of the filter providing for precise filtration and eliminating filter unloading.
Filter Specification
Media | Bi-component Fibers of Polyolefin |
End Caps | Polypropylene (PP) |
Removal Ratings | 1, 3, 5, 10, 25, 50, 75, 100,125, 150 & 200 micron |
O Rings / Gaskets: | Buna N, EPDM, Silicone, Viton |
Nominal Lengths | 9.75, 19.5, 29.25, 39 inches |
Diameter ID / OD | 1.1” (28mm) / 2.5” (63 mm) |
End connections | DOE / SOE (SOE End connections available as special) |
Dimensions
Operating Conditions:
Max operating temperature | : 82 OC |
Max Change Out Differential Pressure | : 50 PSID |
Recommended Change out differential pressure | : 35 PSID |
Applications:
· Pharmaceutical Pre filtration
· High Quality Paint, Resins & Ink
· CED / Top Coat in Automotive Plants
· Bottled Water/Blend water in Breweries
· Process / Rinse water
· Desalination / Pre RO
· Cathode Ray Tube / CD-DVD Manufacture
· Lens Coatings
· Printed Circuit Boards
Membrane Filter Cartridge
Minimum Order Quantity: 50 Piece
Micron Ratings | 1 Micron |
Length | 10 Inch |
Filtration Media | Polypropylene |
Diameter | 2.5 Inch |
Applications | Water Treatment, Pharmaceutical / Biological, Chemical Process, Cosmetics, Beverages/Alcohol |
Maximum Operating Temperature | 80 Deg. C |
Country of Origin | Made in India |