Sterile Membrane Filters
Steri PRO PV series PVDF Filters
Minimum Order Quantity: 50 Piece
Product Brochure
Filter Type | Pharmaceuticals |
Material | PVDF |
Usage/Application | Industrial / Pharmaceutical |
Color | White |
Outside Diamater | 2.7" |
Inside Diameter | 1.1" |
Trinity Steri-PRO PV series PVDF sterilizing filters use high porosity PVDF membrane to meet applications for high flow rates. These membrane filters significantly remove bacteria and undesired particles with high efficiency. PVDF membranes offer broad chemical compatibility with low extractable levels, high protein binding and high chemical inertness. Filters are best suited for application in bulk material filtration, can provide better performance when compared to similar products.
Features and Benefits:
- Designed for longer service life.
- Can sustain High flow rates.
- Effectively reduce the operating and replacement costs of filtration system.
- Reduce the downtime in many applications.
- Manufactured, tested and packaged in a cleanroom
- Provide broad chemical compatibility
- Low protein binding
- Effectively reduce the operating and replacement costs of filtration system.
Filter Specification
Media | Single layer PVDF membrane | Double layer PVDF membrane. |
Support media | Polypropylene | |
Cage /End Caps | Polypropylene | |
Core | Polypropylene | Polyester |
Adaptor | Polypropylene | |
Gasket/ ‘O’ rings | Silicon, EPDM, Viton, NBR, Teflon Encapsulated Viton, Teflon, Encapsulated Silicone |
Dimensions:
Nominal Lengths | 5, 10, 20, 30, 40 inches |
Outside Diameter | 2.7” (68.5 mm) |
Inside Diameter | 1.3” (33 mm) |
Filtration Area | ≥ 0.62 m2 (Single Layer), ≥ 0.55 m2 (Double layer) |
Operating Conditions:
Max. Diff. Pressure | 5.2 bar (forward) / 2.1 bar (reverse) – at 25o C |
Max Temperature | 82°C @ 1.7 Bar |
Autoclave | 124°C, 30min, 30 cycles / 134°C, 30min, 20 cycles |
Steam In-Place | 124°C, 30min, 30 cycles / 134°C, 30min, 20 cycles (Pressure Drop ≤ 0.5 bar) |
Applications:
- Fine Chemicals and Pharmaceuticals
- Biological Fluids & Oral Drugs
- Ophthalmic Liquids
- Gelatins
- Beverages
- Wine & Alcohols
- De-ionized Water Pre-filtration
- Photo resists
PTFE Membrane Filters Cartridges
Product Brochure
Usage/Application | Sterile application |
Material | PTFE membrane |
Micron Ratings | 0.2 |
Type | Sterile filter |
Filter Type | Cartridge Filter |
Diameter | 2.7 inch (69 mm) |
Brand | Trinity Steri-PRO PT series |
Medium Material | 0.2 micrometer Hydrophobic PTFE membrane |
Color | White |
Outside Diamater | 2.7 inch (69 mm) |
Inside Diameter | 1 inch (25.4 mm) |
Applications:
- Sterile venting
- Sterile Filtration of Air & Gas
- Sterile Filtration of Solvents
- Ophthalmic Solutions
- Vent for Autoclaves, Stills & WFI tanks
- Bulk Tank Vents
- High Purity Chemicals
- Phage removal from Air
Filter MOC:
- Media: 0.2 µm Hydrophobic PTFE membrane
- Support Media: Polypropylene
- Cage / Core / End Caps: Polypropylene
- ''''O'''' Rings / Gaskets: Buna N, EPDM, Silicone, Viton
- International Support Ring: Stainless Steel
Dimensions:
- Nominal lengths: 9.75, 10, 20, 30, 40 inches
- Outside Diameter: 2.7 inches (6.9 cm)
- Inside Diameter: 1 inch (2.54 cm)
Operating Conditions:
- Maximum Diff. Pressure: 4.1 bar at 20 deg C / 2.1 Bar at 60 deg C
- Sterilization: Autoclave 30 Mins at 126 deg C. In line Steam 30 Mins. at 135 deg C
PES Sterilizing Grade Filters
Product Brochure
Brand | Trinity Steri-PRO |
Material | Polyethersulfone |
Usage/Application | Industrial / Pharmaceutical |
Color | White |
Application | Sterile Application |
Inside Diameter | 1 inch (25.4 mm) |
Outside Diameter | 2.7 inch (68.5 mm) |
Trinity Steri-PRO PE series Polyethersulfone Sterilizing grade filters are manufactured to conform with the stringent quality standards required by filters that come in contact with biological, pharmaceuticals and other critical processes. The filter cartridges conform to Toxicity tests, meet the requirement of USP 29 Biological test for Plastics, and are manufactured using components that comply with CFR 21 regulations. The Filters are supported by a validation guide prepared specifically for manufacturers requiring product documentation as part of their qualification process.
Application:- Pharmaceuticals
- Biologicals
- Solvents
- Ophthalmic solutions
- Lvp/svp/sterile API
- Vaccines
- High purity chemicals
- High purity water
Filter MOC:
- Media: 0.2 µm Hydrophobic PTFE membrane
- Support Media: Polypropylene
- Cage / Core / End Caps: Polypropylene
- 'O' Rings / Gaskets: Buna N, EPDM, Silicone, Viton
- International Support Ring: Stainless Steel
Dimensions:
- Nominal lengths: 9.75, 10, 20, 30, 40 inches
- Outside Diameter: 2.7 inches (6.9 cm)
Operating Conditions:
- Maximum Diff. Pressure: 4 bar at 20O C / 2.1 Bar at 60O C
- Sterilization: Autoclave 30 Mins at 126OC. In line Steam 30 Mins. at 135O C